How Much Does It Cost To Retile A Bathroom

Posted on

How Much Does It Cost To Retile A Bathroom? Are your old bathroom tile are going to dull and it make your bathroom look to scary? Then you need to make renovation for your bathroom now. There are wide range prices available when you want to re tile your old bathroom. It depends to the square you want to retile, the professional labor cost and the difficulty. You need to know that each tile types get each hard level to install and it give different prices to you. Depending on the type of tile selected, then the cost will varies when you hire the professional or doing by yourself.

How Much Does It Cost To Retile A Bathroom

When you hire the professional, it will give you extra cost to expense, but you will no need to spend your time to do by yourself.  The cost will higher when you count the cost for materials, labors, clean up and tools required. The cost will vary on the company rate and the project of tiling you need to create. Since you means for retiling projects, this means that contractor need to remove the old tile as well as they also need to repair the floor as it is required.  The cost for remove the tile is average about $3 to $5 per square foot. The cost for new tile installation range start from $5 to $17 per square feet depending to material of tile chosen and the bathroom size. Totally, you need to spend about $1000 to $5000 for hire the professional.

If you are the one that have skill good in doing all by yourself, then you can try to Do It Yourself project. This can save your expense cost but keep in mind that you need to spend time and labor for the project to complete. The first thing that you need to do is calculate how much tile that you need to buy before start the project. Be careful to calculate your cost especially the tile that you need for the project. Measure the length and width from bathroom floor and then multiply the two numbers together to get total square footage. The largest cost for retiling expense is for new tile purchasing. The less expensive option is vinyl and laminate that cost less than $1 per square feet. The expensive one is ceramic, porcelain and the natural stone such as granite and marble that expect to cost about $2 per square foot. You also need to consider additional cost for retiling project such as mortar adhesive, grout, bucket, sealer, tile cutter, and many others. The cost of these supplies can be start from $100. Totally, when you do all done DIY project with the tools already have, then you can spend about $$500 to $1000.

Leave a Reply

Your email address will not be published. Required fields are marked *