How To Get Rid Of Mold In Bathroom

Posted on

Do you have any effective ways on How To Get Rid Of Mold In Bathroom? Mold in bathroom can be start from small spot and develop into disgusting sight in your bathroom. If it is untreated, this mold can be develops as hazardous thing in your bathroom with bacteria. Fortunately, you can do several methods to rid of mold in your bathroom without spending much expense. With these methods, you can reach your clean and fresh bathroom.

There are several methods that you can use for rid of mold in your bathroom. Here are trick and tips for remove the mold in your bathroom.

  • First, clean the mold in walls. Make solution of water and bleach, which take 3 parts of water and 1 part of bleach.  Brush with stiff bristled brush and scrub the blackened area. Rinse use clean water.
  • Second is by using baking soda. This is effective for clean mold especially for the black mold.  Mix ¼ teaspoon of baking soda with two cups water. Use spray water, pour the solution and spray into area with mold and scrub with brush. Rinse the area use clean water. Repeat the steps with the solution to prevent the returning mold.
  • Use Hydrogen Peroxide. Use spray bottle with dark color because if you took into light exposed, it will reduce the effectiveness. You can add vinegar into hydrogen peroxide solution to improve the solution effectiveness. Spray the solution and wait about 10-20 minutes to wait reaction of peroxide to mold.  Wipe the surface for clean finishing touch.
  • The next method that you can try for rid of mold in bathroom is use vinegar. Use pure vinegar, put into spray bottle and spray in mold spot in your bathroom. Wait for an hour and of it possible, do not use the bathroom during it. After that, wipe use hot water and dry the area with towel.
READ  Top 10 Bathroom Curtains Trends in 2016

How To Get Rid Of Mold In Bathroom

To prevent mold in bathroom, you can do these several things. First, after you take bath or shower, then squeegee the water off from water walls. Second, waterproof the floor with seal the grout line use standard grout sealer. You also can use vinegar for prevent the mold as it can kills bacteria causes mold about 84% mold species. When you use chemical things such as ammonia, bleach, or hydrogen peroxide, just ensure that you not mix these products as it can cause toxic reactions. You also need to ensure to open the doors and window to allow fresh air and let the mold dry out.

Leave a Reply

Your email address will not be published. Required fields are marked *